Index of ImagOn Basic Process (Short version) 

PrepareCopper Plate
   
Round corners of plate with  file Sand plate with 320 grit wet/dry sandpaper to degrease plate    


Adhere ImagOn® to Plate
Remove inner mylar backing (from inside curl). Spritz with laminating solution.  1 part rubbing 70% isopropyl rubbing alcohol mixed with 3 parts water. Place copper plate face down on ImagOn.
Place "removed" mylar (or newsprint) on top of copper plate to protect press blankets from the ImagOn film. Place press blankets on top of film / plate layers and run through the press. Place press blankets on top of film / plate layers and run through the press. Trim edges of film with a sharp utility knife.


Expose ImagOn® in Exposure Unit 
Olec Exposure Unit. 
Place artwork & plate in vacuum frame.		 Rubylith blocks light from portions of the plate when making exposure tests. Lower glass cover and 
release safety latch. 		 Establish vacuum. Make exposure using integrator. 

 

A variety of media can be used as the original artwork for use with ImagOn film.  Examples of media include pencil on mylar or vellum and computer output from PhotoShop printed on transparency or vellum.


Develop ImagOn®
Remove protective mylar Dissolve unexposed areas in a 10% soda ash solution Rinse under tepid water Squeegee excess water from plate.


Harden ImagOn® Plate


                   Final Plate Edge Prep
               Need Image
Dry plate with hair dryer on air setting. Expose plate in exposure unit for an additional exposure at 4 times the aquatint exposure.    Sand edges of plate with 400 grit we/dry sandpaper at 45 degree angle.


Ink Plate
Apply etching ink with a small square of mat board. Wipe ink off surface of plate with used tarlatan. With a fresh ball of tarlatan, clean top surface of plate. Newsprint as a final wipe helps  control plate tone.


Prepare Paper
 
Soak paper for 20 minutes. Place printing paper between blotters to remove excess water from paper.


Print Image
Place inked plate on top of newsprint Place damp paper on inked plate Lower blankets & print the image. Check finished image quality.